Digital Visual Interface (DVI) is a video display interface developed by the Digital Display Working Group (DDWG). The digital interface is used to connect a video source, such as a display controller to a display device, such as a computer monitor. It was developed with the intention of creating an industry standard for the transfer of digital video content.
Related Posts
Wire-to-Wire Connectors – Power
Ecocables offers a wide variety of wire-to-wire connector include Inertia Lock Wire-to-Wire System, Ditto Wire-to-Wire Interconnects, Standard .062″ Pin and Socket Power Connectors, Micro-Fit 3.0 Products, MOX Products, NSCC – New Standard Casing Contact, Standard .093″ Pin and Socket Connectors, Mini-Fit Products, MLX Power…
read moreWhat is LVDS Cable
Low-voltage differential signaling, or LVDS, is an electrical digital signaling standard that can run at very high speeds over inexpensive twisted-pair copper cables. It specifies the electrical-level details for interoperability between inputs and outputs on integrated circuit chips. Since it is the physical layer…
read moreSilicone rubber wire
The most common silicone rubber wires are as following:
UL3122
UL3132
UL3135
UL3239
UL3323
UL3367
UL3512
UL3587
FFC Cable
Flexible flat cable, or FFC, refers to any variety of electrical cable that is both flat and flexible. A flexible flat cable is a type of flexible electronics. However, the term FFC usually refers to the extremely thin flat cable often found in high…
read moreGlossary of Terms 5 About Wiring Harnes
Receptacle
A female flange mounted wiring device with the conducting elements recessed behind the mating
surface. Often referred to as an outlet. This type of device is normally wired to be live when nothing is
plugged in to it. Therefore, receptacles are wired to the source of…
Glossary of Terms 3 About Wiring Harness
Fuse
A safety device consisting of a strip of wire that melts and breaks an electric circuit if the current exceeds
a safe level.
GFCI
Ground-Fault Circuit-Interrupter; An electrical wiring device that disconnects a circuit whenever it
detects that the electric current is not balanced between the energized conductor…
JST connector
JST is not a specific type or size of connector, but instead it’s an acronym for Japan Solderless Terminal, which is the long form of the company name J.S.T. Mfg. Co., Ltd..JST manufactures numerous series (families) and pitches (pin-to-pin distance) of connectors.
JST Mfg. Co.,…
What is LVDS cable
Low-voltage differential signaling, or LVDS, is an electrical digital signaling standard that can run at very high speeds over inexpensive twisted-pair copper cables. It specifies the electrical-level details for interoperability between inputs and outputs on integrated circuit chips. Since it is the physical layer…
read moreWhat Is LiY Wire
LiY (LiYv) is an 80 Deg C, flexible, VDE approved PVC hook-up wire recommended for the connection of low voltage applications, communications apparatus, electronic assemblies, equipment, racks and switchboards. These stranded tinned copper wires are not permitted to be installed in heavy current applications…
read moreWhat Is Cigarette Lighter Receptacle
The cigarette lighter receptacle in an automobile, initially designed to power an electrically heated cigarette lighter, became a de facto standard DC connector to supply electrical power for portable accessories used in or near an automobile. While the cigarette lighter receptacle is a common…
read more