A grommet is a ring or edge strip inserted into a hole through thin material, typically a sheet of textile fabric, sheet metal and or composite of carbon fiber, wood or honeycomb. Grommets are generally flared or collared on each side to keep them in place, and are often made of metal, plastic, or rubber. They may be used to prevent tearing or abrasion of the pierced material or protection from abrasion of the insulation on the wire, cable, line being routed through the penetration, and to cover sharp edges of the piercing, or all of the above.
Related Posts
Glossary of Terms 3 About Wiring Harness
Fuse
A safety device consisting of a strip of wire that melts and breaks an electric circuit if the current exceeds
a safe level.
GFCI
Ground-Fault Circuit-Interrupter; An electrical wiring device that disconnects a circuit whenever it
detects that the electric current is not balanced between the energized conductor…
Wire-to-Board Connectors – Microminiature
Ecocables offers a wide variety of wire-to-board connector solutions that fit applications requiring high-power solutions or microminiature options. Whatever wire-to-board connector you need for your wire harness design, we can offer for you.
read moreWhat is LVDS Cable
Low-voltage differential signaling, or LVDS, is an electrical digital signaling standard that can run at very high speeds over inexpensive twisted-pair copper cables. It specifies the electrical-level details for interoperability between inputs and outputs on integrated circuit chips. Since it is the physical layer…
read moreGlossary of Terms 4 About Wiring Harness
Inlet
A male flange mounted wiring device with the conducting pins protruding and exposed. This type device
should never be wired to make the exposed pins live while the mating device is unplugged.
Insulation
The material that encases a conductor preventing leakage of current from a conductor.
IP Rating
Ingress…
USB Connector
Universal Serial Bus (USB) is an industry standard developed in the mid-1990s that defines the cables, connectors and communications protocols used in a bus for connection, communication, and power supply between computers and electronic devices.
USB was designed to standardize the connection of computer…
What is H05V2-U wire
Product Description
1.Solid tinned or bare copper conductor.
2.Lead Free PVC Insulation.
3.Rated temperature: 90℃; Rated voltage: 300V/500V
4.Uniform thickness of wire to ensure easy stripping And
cutting.
التطبيقات
Suitable for indoor small electrical instruments.
Standard
UNE-EN 50525-2-31
EN 50525-2-31
UNE – EN 60332-1-2 (Flame propagation)
Wire To Wire Connector
The WTW Connectors consist of mating hermaphroditic, flame retardant polycarbonate housings into which customer terminated power contacts are inserted. Stackable in four directions through the use of molded interlocking keyways, the connectors make wire routing and dressing orderly and easy to accomplish. More importantly,…
read moreFamous Connector Brands
Molex、تايكو(AMP)、3M、SAMTEC in America
JST、HIROSE、YAZAKI、JAE in Japan
FCI in France
KET、يونهو、KUM in Korea
Wire-to-Board Connectors -Signal
Ecocables offers a wide variety of wire-to-board connector solutions that fit applications requiring signal options.Whatever wire-to-board connector you need for your wire harness design,we can offer for you.
read moreDifferent Heat Shrink Tubes
Polyolefin is the standard-bearer in the shrink tubing market. With a 2 to 1 shrink ratio, it heats evenly, doesn’t bubble or split, and is self-extinguishing. It also offers greater flexibility than PVC shrink tubing. Maximum temperature of 275° F. Meets UL 224, CSA…
read more