The connectors in the top row of the image are known as ring terminals and spade terminals (sometimes called fork or split ring terminals). Electrical contact is made by the flat surface of the ring or spade, while mechanically they are attached by passing a screw or bolt through them. The spade terminal form factor facilitates connections since the screw or bolt can be left partially screwed in as the spade terminal is removed or attached. Their sizes can be determined by the size of the conducting wire AWG and the screw/bolt diameter size designation.
Articoli correlati
Avviso relativo alle festività nazionali in Cina
Gentile Cliente,
La festa nazionale cinese è alle porte, da ottobre 1-7,2016. Durante questo periodo, Gli Ecocable resteranno chiusi.
Se hai una richiesta di offerta o un ordine di cablaggio a portata di mano, fatecelo sapere al più presto per non ritardare. Grazie.
FAQ
1. What does”ECOCAVI”mean?
“ECO”means friendly, green, environmental, good. And “ECOCAVI” means friendly, green, good, rohs, reach compliant cables and wire harness.
2. What is essential in order to get a wire harness quote?
Drawing of wire harness.
3. If customer doesn’t have a drawing,what else solution in order…
What Are Ribbon Cables
A Ribbon cable (also known as multi-wire planar cable) is a cable with many conducting wires running parallel to each other on the same flat plane. As a result the cable is wide and flat. Its name comes from its resemblance to a piece…
leggi tuttoBlade Connector
A blade connector is a type of single wire connection using a flat conductive blade which is inserted into a blade receptacle. Usually both blade connector and blade receptacle have wires attached to them either through soldering of the wire to the blade or…
leggi tutto