The connectors in the top row of the image are known as ring terminals and spade terminals (sometimes called fork or split ring terminals). Electrical contact is made by the flat surface of the ring or spade, while mechanically they are attached by passing a screw or bolt through them. The spade terminal form factor facilitates connections since the screw or bolt can be left partially screwed in as the spade terminal is removed or attached. Their sizes can be determined by the size of the conducting wire AWG and the screw/bolt diameter size designation.
関連している 投稿
よくある質問
1. What does”ECOCABLES”mean?
“ECO”means friendly, green, environmental, good. And “ECOCABLES” means friendly, green, good, rohs, reach compliant cables and wire harness.
2. What is essential in order to get a wire harness quote?
Drawing of wire harness.
3. If customer doesn’t have a drawing,what else solution in order…
Blade Connector
A blade connector is a type of single wire connection using a flat conductive blade which is inserted into a blade receptacle. Usually both blade connector and blade receptacle have wires attached to them either through soldering of the wire to the blade or…
続きを読む中国の祝日のお知らせ
お客様各位,
中国建国記念日が近づいてきました, 10月から 1-7,2016. この期間に, エコケーブルは閉鎖されます.
ワイヤーハーネスのRFQまたは注文が手元にある場合, 遅れないようできるだけ早くお知らせください. ありがとう.
What Are Ribbon Cables
A Ribbon cable (also known as multi-wire planar cable) is a cable with many conducting wires running parallel to each other on the same flat plane. As a result the cable is wide and flat. Its name comes from its resemblance to a piece…
続きを読む