Ecocables offers a wide variety of wire-to-board connector solutions that fit applications requiring high-power solutions or microminiature options. Whatever wire-to-board connector you need for your wire harness design, we can offer for you.
An insulation-displacement connector (IDC), insulation-displacement technology/termination (IDT) or insulation-piercing connector (IPC) is an electrical connector designed to be connected to the conductor(s) of an insulated wire or cable by a connection process which forces a selectively sharpened blade or blades through the insulation, bypassing…
read moreFlexible flat cable, or FFC, refers to any variety of electrical cable that is both flat and flexible. A flexible flat cable is a type of flexible electronics. However, the term FFC usually refers to the extremely thin flat cable often found in high…
read morePolyolefin is the standard-bearer in the shrink tubing market. With a 2 to 1 shrink ratio, it heats evenly, doesn’t bubble or split, and is self-extinguishing. It also offers greater flexibility than PVC shrink tubing. Maximum temperature of 275° F. Meets UL 224, CSA…
read moreConector
A female cord mounted wiring device with the conducting elements recessed behind the mating surface.
This type of device is normally wired to be live when nothing is plugged in to it. Therefore, connectors
are wired to the source of power.
CSA
Canadian Standards Association; A Canadian product…
Wire gauge is a measurement of how large a wire is, either in diameter or cross sectional area. This determines the amount of electric current a wire can safely carry, as well as its electrical resistance and weight per unit of length. Wire gauge…
read moreEcocables is able to offer the following teflon wires,meet the different customer’s design needs:
UL1330
UL1331
UL1332
UL1333
UL1887
UL10064/10109
UL10362
A Tamiya connector is a type of DC power connector,commonly used on radio-controlled model vehicle battery packs and chargers. They are also commonly used on airsoft guns.
The usual wiring has the positive (red) wire running to the terminal with a square profile, and the…
Ecocables offers a wide variety of wire-to-board connector solutions that fit applications requiring signal options.Whatever wire-to-board connector you need for your wire harness design,we can offer for you.
read moreJST is not a specific type or size of connector, but instead it’s an acronym for Japan Solderless Terminal, which is the long form of the company name J.S.T. Mfg. Co., Ltd..JST manufactures numerous series (families) and pitches (pin-to-pin distance) of connectors.
JST Mfg. Co.,…
Low-voltage differential signaling, or LVDS, is an electrical digital signaling standard that can run at very high speeds over inexpensive twisted-pair copper cables. It specifies the electrical-level details for interoperability between inputs and outputs on integrated circuit chips. Since it is the physical layer…
read more