The most common silicone rubber wires are as following:
UL3122
UL3132
UL3135
UL3239
UL3323
UL3367
UL3512
UL3587
The most common silicone rubber wires are as following:
UL3122
UL3132
UL3135
UL3239
UL3323
UL3367
UL3512
UL3587
Wire gauge is a measurement of how large a wire is, either in diameter or cross sectional area. This determines the amount of electric current a wire can safely carry, as well as its electrical resistance and weight per unit of length. Wire gauge…
read moreAdapter
A cord or block style device with different ends that allows different devices to connect.
AC
Alternating Current; Electric current that rises from zero to a maximum in one direction, falls to zero and then rises to a maximum in the opposite direction, and then repeats…
Receptacle
A female flange mounted wiring device with the conducting elements recessed behind the mating
surface. Often referred to as an outlet. This type of device is normally wired to be live when nothing is
plugged in to it. Therefore, receptacles are wired to the source of…
In electronics, a ferrite core is a type of magnetic core made of ferrite on which the windings of electric transformers and other wound components such as inductors are formed. It is used for its properties of high magnetic permeability coupled with low electrical…
read moreIn electronics, a phone connector is a common family of connector typically used for analog signals, primarily audio. It is cylindrical in shape, typically with two, three or four contacts. Three-contact versions are known as TRS connectors, where T stands for “tip”, R stands…
read morePolyurethane, commonly abbreviated PU, is any polymer consisting of a chain of organic units joined by urethane links.
Polyurethane polymers are formed by reacting a monomer containing at least two isocyanate functional groups with another monomer containing at least two alcohol groups in the presence…
Universal Serial Bus (USB) is an industry standard developed in the mid-1990s that defines the cables, connectors and communications protocols used in a bus for connection, communication, and power supply between computers and electronic devices.
USB was designed to standardize the connection of computer…
Inlet
A male flange mounted wiring device with the conducting pins protruding and exposed. This type device
should never be wired to make the exposed pins live while the mating device is unplugged.
Insulation
The material that encases a conductor preventing leakage of current from a conductor.
IP Rating
Ingress…
JST is not a specific type or size of connector, but instead it’s an acronym for Japan Solderless Terminal, which is the long form of the company name J.S.T. Mfg. Co., Ltd..JST manufactures numerous series (families) and pitches (pin-to-pin distance) of connectors.
JST Mfg. Co.,…