A grommet is a ring or edge strip inserted into a hole through thin material, typically a sheet of textile fabric, sheet metal and or composite of carbon fiber, wood or honeycomb. Grommets are generally flared or collared on each side to keep them in place, and are often made of metal, plastic, or rubber. They may be used to prevent tearing or abrasion of the pierced material or protection from abrasion of the insulation on the wire, cable, line being routed through the penetration, and to cover sharp edges of the piercing, or all of the above.
Related Posts
Wire-to-Board Connectors -I/O
Ecocables offers a wide variety of wire-to-board connector solutions that fit applications requiring I/O options. Whatever wire-to-board connector you need for your wire harness design, we can offer for you.
read moreWire-to-Board Connectors – Microminiature
Ecocables offers a wide variety of wire-to-board connector solutions that fit applications requiring high-power solutions or microminiature options. Whatever wire-to-board connector you need for your wire harness design, we can offer for you.
read moreWhat is Wire gauge
Wire gauge is a measurement of how large a wire is, either in diameter or cross sectional area. This determines the amount of electric current a wire can safely carry, as well as its electrical resistance and weight per unit of length. Wire gauge…
read moreInsulation-Displacement Connector
An insulation-displacement connector (IDC), insulation-displacement technology/termination (IDT) or insulation-piercing connector (IPC) is an electrical connector designed to be connected to the conductor(s) of an insulated wire or cable by a connection process which forces a selectively sharpened blade or blades through the insulation, bypassing…
read moreGlossary of Terms 2 About Wiring Harness
Connector
A female cord mounted wiring device with the conducting elements recessed behind the mating surface.
This type of device is normally wired to be live when nothing is plugged in to it. Therefore, connectors
are wired to the source of power.
CSA
Canadian Standards Association; A Canadian product…
Wire-to-Board Connectors – Power
Ecocables offers a wide variety of wire-to-board connector solutions that fit applications requiring high-power solutions or power options. Whatever wire-to-board connector you need for your wire harness design, we can offer for you.
read moreWhat is LVDS Cable
Low-voltage differential signaling, or LVDS, is an electrical digital signaling standard that can run at very high speeds over inexpensive twisted-pair copper cables. It specifies the electrical-level details for interoperability between inputs and outputs on integrated circuit chips. Since it is the physical layer…
read moreUSB Connector
Universal Serial Bus (USB) is an industry standard developed in the mid-1990s that defines the cables, connectors and communications protocols used in a bus for connection, communication, and power supply between computers and electronic devices.
USB was designed to standardize the connection of computer…
Wire-to-Wire Connectors – Signal
Ecocables offers a wide variety of wire-to-wire connector include the versatile SL™ connectors, power solutions such as Mini-Fit®, and a variety of sealed connector solutions.
Whatever wire-to-wire connector you need for your wire harness design, ecocables can offer for you.
Wire-to-Board Connectors -Signal
Ecocables offers a wide variety of wire-to-board connector solutions that fit applications requiring signal options.Whatever wire-to-board connector you need for your wire harness design,we can offer for you.
read more